| TYPE OF TEST |
STANDARD |
ΕΝ STANDARD |
| SAMPLING BITUMINOUS MATERIALS |
ASTM D140 |
------ |
| SAMPLING AND PREPARATION OF TEST SAMPLES |
------ |
58 & 12594 |
| DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS |
ASTM D244 |
12847 |
| DETERMINATION OF WATER CONTENT IN BITUMINOUS EMULSIONS (DISTILLATION METHOD) |
ASTM D244 |
1428 |
| RECOVERY OF BINDER FROM BITUMINOUS EMULSION (RECOVERY BY EVAPORATION) |
ASTM D244 |
13074-1 |
| RECOVERY OF BINDER FROM BITUMINOUS EMULSION (STABILIZATION AFTER RECOVERY BY EVAPORATION) |
------ |
13074-1 |
| DETERMINATION OF VISCOSITY SAYBOLT METHOD (25&50°C) |
ASTM D244 |
------- |
| DETERMINATION OF EFFLUX TIME |
------ |
12846-1 |
| DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMINOUS EMULSIONS BY DISTILLATION |
ASTM D402 |
1431 |
| SIEVE TEST |
ASTM D244 |
------ |
| DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSION |
------ |
1429 |
| DETERMINATION OF STORAGE STABILITY BY SIEVING |
------- |
1429 |
| COATING TEST |
ASTM D244 |
------ |
| DETERMINATION OF PARTICLE POLARITY OF BITUMINOUS EMULSIONS |
ASTM D244 |
1430 |
| DETERMINATION OF THE FRAASS BREAKING POINT |
------- |
12593 |
| DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS |
ASTM D244 |
12848 |
| DETERMINATION OF BRAKING VALUE OF CATIONIC BITUMINOUS EMULSIONS (MINERAL FILLER METHOD) |
------- |
13075-1 |
| DETERMINATION OF THE pH VALUE OF BITUMINOUS EMULSION |
------- |
12850 |
| DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST |
------ |
13614 |
| TESTS ON RESIDUE |
|
|
| DETERMINATION OF THE ELASTIC RECOVERY OF MODIFIED BITUMEN |
ASTM D5892 |
13398 |
| DETERMINATION OF NEEDLE PENETRATION |
ASTM D5 |
1426 |
| DETERMINATION OF SOFTENING POINT (RING AND BALL METHOD) |
ASTM D36 |
1427 |
| DETERMINATION OF DUCTILITY OF BITUMINOUS MATERIALS |
ASTM D113 |
------ |
