| TYPE OF TEST | STANDARD | ΕΝ STANDARD |
| SAMPLING BITUMINOUS MATERIALS | ASTM D140 | —— |
| SAMPLING AND PREPARATION OF TEST SAMPLES | —— | 58 & 12594 |
| DETERMINATION OF SETTLING TENDENCY OF BITUMINOUS EMULSIONS | ASTM D244 | 12847 |
| DETERMINATION OF WATER CONTENT IN BITUMINOUS EMULSIONS (DISTILLATION METHOD) | ASTM D244 | 1428 |
| RECOVERY OF BINDER FROM BITUMINOUS EMULSION (RECOVERY BY EVAPORATION) | ASTM D244 | 13074-1 |
| RECOVERY OF BINDER FROM BITUMINOUS EMULSION (STABILIZATION AFTER RECOVERY BY EVAPORATION) | —— | 13074-1 |
| DETERMINATION OF VISCOSITY SAYBOLT METHOD (25&50°C) | ASTM D244 | ——- |
| DETERMINATION OF EFFLUX TIME | —— | 12846-1 |
| DETERMINATION OF RESIDUAL BINDER AND OIL DISTILLATE FROM BITUMINOUS EMULSIONS BY DISTILLATION | ASTM D402 | 1431 |
| SIEVE TEST | ASTM D244 | —— |
| DETERMINATION OF RESIDUE ON SIEVING OF BITUMINOUS EMULSION | —— | 1429 |
| DETERMINATION OF STORAGE STABILITY BY SIEVING | ——- | 1429 |
| COATING TEST | ASTM D244 | —— |
| DETERMINATION OF PARTICLE POLARITY OF BITUMINOUS EMULSIONS | ASTM D244 | 1430 |
| DETERMINATION OF THE FRAASS BREAKING POINT | ——- | 12593 |
| DETERMINATION OF MIXING STABILITY WITH CEMENT OF BITUMINOUS EMULSIONS | ASTM D244 | 12848 |
| DETERMINATION OF BRAKING VALUE OF CATIONIC BITUMINOUS EMULSIONS (MINERAL FILLER METHOD) | ——- | 13075-1 |
| DETERMINATION OF THE pH VALUE OF BITUMINOUS EMULSION | ——- | 12850 |
| DETERMINATION OF ADHESIVITY OF BITUMINOUS EMULSIONS BY WATER IMMERSION TEST | —— | 13614 |
| TESTS ON RESIDUE | | |
| DETERMINATION OF THE ELASTIC RECOVERY OF MODIFIED BITUMEN | ASTM D5892 | 13398 |
| DETERMINATION OF NEEDLE PENETRATION | ASTM D5 | 1426 |
| DETERMINATION OF SOFTENING POINT (RING AND BALL METHOD) | ASTM D36 | 1427 |
| DETERMINATION OF DUCTILITY OF BITUMINOUS MATERIALS | ASTM D113 | —— |
